Custom Heat Sinks
for LED Lighting

XINXIANG manufactures custom aluminum heat sinks and finned housings for COB downlights, linear luminaires, industrial high-bay lights, floodlights and street lighting. We make parts to match your LED mounting layout, fixture envelope and production requirements.

Thermal Management for LED Lighting

LEDs are efficient light sources, but part of their electrical input becomes heat. Excess temperature can affect light output, color stability and long-term reliability. A suitable heat sink must be considered as part of the whole luminaire—not selected from fixture wattage alone.

The thermal path runs from the LED package or COB through its substrate, mounting interface and aluminum structure, then into the surrounding air. The mounting surface, interface material, fin spacing, installation orientation and ventilation can all change the result.

At XINXIANG, we focus on manufacturing the aluminum structure and accurate mounting features that lighting manufacturers need to implement their own thermal and mechanical designs.

From LED Module to Ambient Air

LED / COB module → thermal interface → mounting base → fins or finned housing → surrounding air.

Each interface should be considered together when assessing a new fixture.

Manufacturing Focus

Flat contact faces, consistent hole locations, suitable fin geometry and practical CNC access help turn a proposed lighting design into repeatable components.

LED strip in an extruded aluminum channel with an exposed mounting surface and a separate frosted diffuser

LED Heat Sink Solutions by Lighting Application

Each lighting fixture needs a different balance of heat dissipation, size, mounting geometry and appearance. The examples below are possible manufacturing routes, not fixed thermal performance recommendations.

Lighting ApplicationTypical Heat Sink SolutionKey Design Considerations
COB Downlights & SpotlightsRound or radial extruded aluminum heat sink; compact forged pin-fin design where suitableCOB/holder mounting pattern, reflector clearance, usable diameter and height, flat LED contact surface
Linear Commercial & Architectural LightsStraight-fin extrusion cut to the required lengthLED board support, end caps, diffuser clearance, cut length and ventilation along the fin channels
Industrial High-Bay LightsRadial heat sink or integrated finned aluminum housingContinuous operating load, hanging orientation, driver position, weight and available airflow
Outdoor Floodlights & Street LightsDie-cast finned housing or separate machined extruded heat sinkLED array mounting, enclosure sealing interfaces, outdoor exposure, surface finish and mechanical attachment

Final cooling performance depends on the actual LED module, fixture assembly, ambient temperature, installation orientation and airflow conditions.

Manufacturing Options for Custom LED Heat Sinks

Extruded Aluminum Heat Sinks

A practical choice for straight-fin sections and repeatable profiles, especially linear fixtures. Profiles can be cut to length, drilled, tapped and milled for the LED board and housing.

Explore extruded heat sinks.

Round, Radial & Forged Heat Sinks

Round heat sinks can fit COB modules and circular optics. Based on diameter, fin layout and volume, we can evaluate radial extrusion or cold-forged pin-fin structures.

Round heat sink options · Forged heat sinks

Die-Cast Finned Housings

Die casting can integrate fins, mounting bosses, enclosure features and brackets in one aluminum part. Critical LED contact and sealing surfaces may be CNC machined after casting.

See die-cast heat sinks.

Secondary Machining & Finishing

Depending on the drawing, we can add contact-face milling, threaded holes, slots, pockets, wire clearances and selected anodizing or coating. We can identify surfaces requiring masking or later machining.

Round Aluminum Extruded Heat Sink with Radial Fins
Two extruded aluminum LED housings showing the mounting channels and underside fins
Stacked aluminum LED heat sink extrusions showing round openings at the cut ends

Important Details in LED Heat Sink Design

1. Thermal Load & Temperature Limits

Fixture input wattage does not equal the heat entering the heat sink. Share the module specification, estimated heat load, maximum ambient temperature and the LED maker’s specified temperature limit when available.

2. Mounting Face & Thermal Interface

A sufficiently flat, clean mounting face helps maintain consistent contact with the LED board or COB through the chosen interface material. Specify flatness, surface finish, hole positions and any no-coating areas on the drawing.

3. Fin Spacing, Orientation & Airflow

Passive fixtures depend on natural airflow around fins. More fins are not always better if their spacing restricts air movement. Consider the installed position, fin-channel direction and nearby covers. Read our fin spacing guide.

4. Optical & Mechanical Integration

Check the LED board, holder, reflector, diffuser or lens, wiring and mounting hardware as one assembly. Optical keep-out zones, cable passages and machining access should be confirmed before tooling.

5. Surface Finish & Outdoor Exposure

Anodizing and coating requirements vary with the alloy, appearance and operating environment. Mark thermal contact areas, electrical grounding points and sealing interfaces that need masking or secondary machining.

Existing Extrusion Profiles or a New Custom Design

An existing extrusion can be a cost-effective starting point when its width, fin height, base thickness and airflow geometry fit the fixture. XINXIANG maintains a growing Heat Sink Extrusion Profiles library to help engineers find possible cross-sections.

For a suitable profile, we can quote cutting, mounting-face machining, drilling, tapping, slots and anodizing. Existing tooling may avoid a new die charge, subject to suitability and availability for the project.

If no listed section meets the requirements, we can review a custom extrusion based on your drawing. The geometry can be checked for extrusion feasibility, and our tooling costs are generally competitive.

Why Work with XINXIANG for LED Heat Sinks?

We manufacture thermal components rather than finished LED luminaires. Our role is to help lighting equipment manufacturers turn a mechanical design into consistent, production-ready aluminum parts.

Manufacturing Route Review

Evaluate extrusion, forging or die casting against the part geometry, expected production volume, CNC operations and cost targets.

Precision CNC Machining

Produce mounting faces, threaded holes, pockets, slots and assembly-critical features according to customer drawings.

Finishing & Masking

Coordinate suitable anodizing or coating and identify thermal contact, grounding or sealing areas requiring special treatment.

Sampling & Inspection

Support prototype and pre-production samples, then check agreed critical dimensions and appearance requirements in production.

With existing tooling resources and coordinated extrusion, CNC machining, finishing and inspection, XINXIANG offers a practical route from drawings to repeat orders.

Common Questions About LED Lighting Heat Sinks

Can an existing heat sink profile be used for an LED lighting project?

Yes, if its cross-section, mounting face and airflow arrangement suit the fixture. We can cut and machine suitable extrusions; changes to the fundamental cross-section usually require another die.

Yes. We can review CNC machining of contact surfaces, holes, threads and other interfaces. Mark critical tolerances and coating restrictions on the drawing.

Extrusion is often economical for a consistent finned profile. Die casting can integrate a more complex enclosure and heat sink into one component. Geometry, volume, thermal conditions and secondary machining determine the choice.

No. We can review manufacturability and flag interface or airflow considerations, but final thermal performance should be verified by the lighting designer in the assembled fixture under intended operating conditions.

Request a Quote for Your LED Heat Sink

Send your CAD file or drawing. If your project is still at an early stage, a dimensioned sketch is enough to get started. We’ll review the drawing, identify viable manufacturing routes and quote against the confirmed specifications.

You can also contact our team at sales@heat-sinks.com

Drawings and project information are treated as confidential.

Send Your Inquiry Today

Send us your drawing or project requirements. Our team will review your request and typically respond within 24 hours.

You can also email us directly at sales@heat-sinks.com

Drawings and project information are treated as confidential.